GEAR MOTOR MR 383 28
|
|
 |
| TYPE | RATIO | L mm |
*R.P.M. no load *min-1 |
*R.P.M. S2 *min-1 |
S2 torque Nm |
Max torque Nm |
I max 24 Vdc |
| MR 383 28 1/16 | 16 | 79 | 530 | 380 | 0,21 | 0,75 | 2,1 |
| MR 383 28 1/64 | 64 | 87 | 145 | 104 | 0,67 | 2,3 | 2,1 |
| MR 383 28 1/256 | 256 | 95 | 37 | 26,5 | 2,4 | 8,5 | 2,1 |
Length "L" of the gearmotor as a funtion of reduction and output number of revolution with the standard motor 383 8 output W 9000 Rpm loadness, 12 or 24 Vdc. Starting corrent 2,1 A.
Drivingshaft supported by a self lubrificating bushings. Output shaft supported by a self lubrificating bushing. The motor’s surface is plated to avoid corrosion. The gearbox is die casting made.
*The speed rotation can change of ±10%.
The test was made using a (0,5 A) corrent with a timing 5' ON 9' OFF.
The starting corrent is (I max) must be maintained for more than 2".
Max load on the output shaft: Axial 0 N, Radial 10 N
The standard motors are in conformity with CE standard.
The standard motors are in conformity with CE standard.
Possibility to apply other motor types Ø 40 or 23,5 with different voltage and RPM and with electrical noise suppressors.