MOTORIDUTTORE CON VITE SENZA FINE MVSF 863 L 26
|
|
 |
| TYPE | RATIO | R.P.M. no load *min-1 |
R.P.M. S 1 *min-1 |
S1 torque Nm |
R.P.M. S2 *min-1 |
S2 torque Nm |
Max torque Nm |
I max 24 Vdc |
| MVSF 863 L 26 1/10 | 10,5 | 320 | 280 | 1,8 | 230 | 4 | 14 | 36 |
| MVSF 863 L 26 1/15 | 15,5 | 215 | 190 | 2,8 | 150 | 6,5 | 20 | 30 |
| MVSF 863 L 26 1/20 | 21 | 165 | 145 | 3,5 | 120 | 9 | 22 | 24 |
| MVSF 863 L 26 1/30 | 31 | 105 | 95 | 4 | 75 | 9 | 20 | 23 |
Gear motor with worm screw and standard motor Ø 63 12 or 24 Vdc 3300 RPM loadness 120W. Starting current 36 A.
Driving shaft mounted with on 2 ball bearings Output shaft supported by two ball bearing with oil splash guard on output side. Connecting 2 wire 1 mm x L 300 mm.
*The rotation speed can change of ±10%.
The S1 load test was made using a (I 4,5 A) current in the air with an increase of temperature of 70°.
The S2 test was made using (10 A) current in the air with a 50% timing 5’ with an increase of temperature of 80° max.
The starting current is (I max) and cannot be maintained for more than 2”.
Max forces wich may act on shaft Axial 250 N, Radial 400 N.
It is possible to apply an encoder.